Contacts | Staff Login  
  • Home
  • Profile
  • Products
  • Services
  • News Room
  • Photo Gallery
  • New Stock Items
  • GE Healthcare
    WelchAllyn
    Gluco Plus
    Masimo
    Product Categories
     
     
     Previous « » Next 

    Infant Radiant Warmer / Open Care System

      Infant Radiant Warmer / Open Care System ::


    Infant Radiant Warmer
    Item Code : NIC350
    SST Infant Warmers are designed to provide advance warming capabilities while using one touch operations to simplify procedures.
    Immediately after delivery the new born baby experiences some degree of thermal instability as it comes from the mothers womb which has the stable environment to the cooler environment of the delivery room.
    Available with a choice of thermal control system Skin/Manual control.
    Two function control modes provide the clinician more flexibility while optimizing the thermal environment.
    In addition, the Skin/ Air temperature display is larger then the other set temperature display.
    Advance microprocessor controlled with self-check on the electronic circuit.
    Digital display of patient temperature and soft touch display of control temperature.
    Skin Temperature can be converted from Celsius to Fahrenheit by the push of a button.
    The spacious baby bed incorporates easily drop down sides for maximum access to the patient.
    The control panel is also the heart for a completely integrated alarm system with both audible and visual indicators in the event of Probe Fail, Skin High, Skin Low, Power Fail, Heater Fail.
    Manual Mode:
    Facility to converting the warmer from servo mode to manual mode for non-stop working.
    In Manual mode warmer will start from 40% heat and can be increased upto 99% according to usage.
    Heater Assembly:
    The Heater assembly located above the cente r of the support structure consists of radiant heater and reflector with inbuilt halogen examination lamp for assessment of Infant Color.

    Technical Specification
    Height 1850mm
    Length 900mm
    Width 700mm
    Electrical Specification
    Power supply 200V/50Htz
    Heater Power 650Watts
    Fuse 5 Amp



    Open Care System
    Item Code : NIC355
    Microprocessor Controlled.
    The digital, microprocessor-based controller comes standard with a full spectrum of features.
    The Tiana Open care system comes complete with automatic Manual and baby (Servo) modes.
    Two function control models provide the clinician more flexibility while optimizing the thermal environment.
    Skin temperature display is larger then other set temperature display.
    Skin temperature display can be converted from °C to °F by the push of a buttom.
    A full complement of alarm provides safety and convenience, with both audible and visual indicators in the event of: High Temp. / Low Temp., Set High / Set Low, Probe Failure, Power Failure.
    The system automatically starts the heating from 40% in manual mode and the same can be changed through settings upto 99%.
    The High & Low Temp. alarm settings can be adjusted according to the patient condition.
     
    The Radiant Warmer Features an independent ambient temperature probe which maximizes the heating efficiency across the range of operating temperature.
      A big LCD is provided for more specific information & visualization of the heater power in manual and servo modes.
      The system automatically converts from servo mode to manual mode in case of probe failure thus providing non stop working of the unit.
      The spacious baby bed incorporates easily drop down sided for maximum access to the patient.
    Heater Assembly:
    The heater assembly located above the center of the support structure consists of an integral examination light and a 650 Watts heating system for quick warming and even distribution of heat on the baby bed.
    The First Breath:
    The open care system combines virtually all the technology a caregiver may need in situation needed for resuscitation.
     
    The neonate can be supplied with a constant oxygen flow through the Oxygen humidifier when connected to an oxygen cylinder (optional).
     
    The motorized slow suction can be used with a simple flip of a switch
     
    A digital Apgar timer is standard, which signals when 1,5 and 10 minutes have elepsed.

    Technical Specification
    Height 1924mm
    Length 884mm
    Width 858mm
    Electrical Specification
    Power supply 200V/50Htz
    Heater Power 650Watts
    Fuse 5 Amp
    IEC COMPLIANT



    Open Care System - Adjustable Height
    Item Code : NIC360
    Microprocessor Controlled.
    The digital, microprocessor-based controller comes standard with a full spectrum of features.
    The Tiana Open care system comes complete with automatic Manual and baby (Servo) modes.
    Two function control models provide the clinician more flexibility while optimizing the thermal environment.
    Dual digital temperature display is larger then other set temperature display.
    Skin temperature display can be converted from °C to °F by the push of a bottom.
    A full complement of alarm provides safety and convenience, with both audible and visual indicators in the event of: High Temp. / Low Temp., Set High / Set Low, Probe Failure, Power Failure.
    The system automatically starts the heating from 40% in manual mode and the same can be changed through settings upto 99%. This changed power will remain for 15 minutes only and after that it will become 40% automatically.
    The High & Low Temp. alarm settings can be adjusted according to the patient condition.
     
    The Radiant Warmer Features an independent ambient temperature probe which maximizes the heating efficiency across the range of operating temperature.
      A big LCD is provided for more specific information & visualization of the heater power in manual and servo modes.
      The system automatically converts from servo mode to manual mode in case of probe failure thus providing non stop working of the unit.
      The spacious baby bed incorporates easily drop down sided for maximum access to the patient.
    Heater Assembly:
    The heater assembly located above the center of the support structure consists of an integral examination light and a 650 Watts heating system for quick warming and even distribution of heat on the baby bed.
    The First Breath:
    The open care system combines virtually all the technology a caregiver may need in situation needed for resuscitation.
     
    The neonate can be supplied with a constant oxygen flow through the Oxygen humidifier when connected to an oxygen cylinder.
     
    The motorized slow suction can be used with a simple flip of a switch
     
    A digital Apgar timer is standard, which signals when 1,5 and 10 minutes have elepsed.
    Motorised Hi/Low System:
    Utilizing the latest technology in motorised up and down mechanism for the movement of the baby bed for ease in doing procedures.

    Technical Specification
    Height 1924mm
    Length 884mm
    Width 858mm
    Electrical Specification
    Power supply 200V/50Htz
    Heater Power 650Watts
    Fuse 5 Amp
    IEC COMPLIANT

     
      Previous «   » Next  
    Return to top
    Sitemap | Privacy Policy | Terms and Conditions | Webmaster